Ionization filter | light mineralization & activated carbon filter cartridge with H2 enrichment

• For use as a stand-alone water filter for tap water,
  or after a reverse osmosis system or water filter
• Water filtration with activated carbon granules & functional ceramic beads
• Mineralization with sintered bioceramic beads such as magnesium, calcium, tourmaline, far infrared, PI-Power and others,
• thereby increasing the pH value by approx. 1 to 1.5 pH
• Enrichment with H2 gas: values up to 1 ppm H2 content possible Reduction of
• the redox value by -300 to -600 mV into the antioxidant range
• Useful life for 6 months after first contact with water, the longer the useful life, the lower the pH values & H2 content achieved
• Recommended max.
• Flow rate: 1 liter/minute
• Empty weight: 0.6 kg; total weight when filled with water, 1.1 kg
• Observe flow direction! Ideally mount vertically with inlet at the top

Two variants to choose from: 1. spin-on filter only without connections
2. pre-assembled with all connections (2x angle connectors, 1x shut-off valve, wall brackets, screws and plugs)