Valeacell pH Test Drops 10 ml – Test the pH of your drinking water yourself

Check the pH of your water

With Valeacell pH test drops, you can check the pH level of drinking water yourself. The indicator colours the water sample differently depending on the pH level, ranging from acidic to neutral to alkaline (pH 3 to 10).

It’s that simple

1. Fill a clean, colourless glass with 50 ml of water.
2. Add 5 drops (1 drop per 10 ml) and swirl well.
3. Immediately compare the colour with the colour chart and read off the pH value.

Colour scale

The colour chart is included as a card with each bottle.

Tip: compare two glasses

Test tap water and water from your water filter carafe side by side. This way, you can see at a glance how the pH value changes after filtering, and you can also check later whether your filter is still working as usual.

Contents

• 1 dropper bottle of pH test drops, 10 ml (approx. 200 drops, approx. 40 tests)

The drops indicate only the pH value of the water sample. They are not a medical device and make no claims regarding health.

Safety instructions

Warning (hazard pictogram GHS02, flame). Contains ethanol.

• H226 The liquid and vapour are flammable.
• P102 Keep out of reach of children.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
• P233 Keep container tightly closed.
• P403+P235 Store in a well-ventilated place. Keep cool.
• P501 Dispose of contents/container in accordance with local regulations.

Do not drink the test sample after taking a reading; pour it away instead. UFI: N200-U0CW-7000-Q21C

Importer

R. V. Eckert (Valeacell), Šmeralova 212, 742 58 Příbor, Czech Republic, +420 704 140 211, info@valeacell.com